

SM FPCI-650 Flexo Printing Machine with Central Drum
Technical Specifications
1. Drum-type flexographic printing machines adapt to a wide variety of printing materials.
In this type of flexographic printing machine, since the printing material is tightly wound around the central printing cylinder, adjusting the printing pressure and reprint functions requires adjusting the position of the anilox cylinder and the printing plate.
The material is not affected by the printing process and, thanks to the support of the central printing cylinder, is not subjected to secondary deformation caused by machine operation during printing. The printing machine can print on breathable 15-micron polyethylene film, non-woven fabrics, plastics, and thicker composite materials.
2. Accurate overprinting and low rejection rate. During the printing process, as long as the alignment adjustment and pressure adjustment of each color group are completed, no further adjustment is needed throughout the entire printing process, and the alignment position and pressure of the material in the working process can be consistent with the first finished sample.
3. Flexographic printing with low material surface area. Thanks to the use of flexographic printing plates, the effect of irregularities on the paper surface on the print can be prevented by adjusting the appropriate printing pressure, and printing can be done on various paper types such as coated white cardboard, wood pulp liner, kraft cardboard, and white cardboard.
4. Low ink consumption, low solvent residue, and low drying energy consumption utilize the anilox roller ink transfer printing method, which can precisely control the amount of ink to adapt to different printing patterns.
5. Plate preparation is easy and fast.
Flexographic printing plate making is faster, and a plate set can usually be easily completed in one day.

Print speed:
Maximum Print Width
Repeat Print Length:
Main motor:
0-250 m/min
650mm
350-900mm
SERVO







